AmCharts 4 - multiple datasets
please, I'm trying to create with AmCharts 4 chart with multiple data sets. In previous version it is done this way: https://www.amcharts.com/demos/multiple-data-sets/
but I can't find anything how to make it in 4th version.
I use the code from their website.
Everything is ok, next chart I want to add in section starting with comment add ATR -> I need to show it under the original chart.
Thank you very much for any help.
Have a nice day!
var chart = am4core.create("candlestick-chart", am4charts.XYChart);
chart.paddingRight = 20;
// chart.dateFormatter.inputDateFormat = "YYYY-MM-dd";
chart.dateFormatter.inputDateFormat = "x";
var dateAxis = chart.xAxes.push(new am4charts.DateAxis());
dateAxis.renderer.grid.template.location = 0;
var valueAxis = chart.yAxes.push(new am4charts.ValueAxis());
valueAxis.tooltip.disabled = true;
/*
add default series
*/
var series = chart.series.push(new am4charts.CandlestickSeries());
series.dataFields.dateX = "date";
series.dataFields.valueY = "close";
series.dataFields.openValueY = "open";
series.dataFields.lowValueY = "low";
series.dataFields.highValueY = "high";
series.dataFields.atr = "atr";
series.dataFields.average_atr = "average_atr";
series.simplifiedProcessing = true;
series.tooltipText = "Open:${openValueY.value}nLow:${lowValueY.value}nHigh:${highValueY.value}nClose:${valueY.value}nATR:{atr.formatNumber('#.000')}nAverage ATR:{average_atr.formatNumber('#.000')}";
series.riseFromPreviousState.properties.fillOpacity = 1;
series.dropFromPreviousState.properties.fillOpacity = 0;
chart.cursor = new am4charts.XYCursor();
/*
add scrollbar
*/
// a separate series for scrollbar
var scrollbarSeries = chart.series.push(new am4charts.LineSeries());
scrollbarSeries.dataFields.dateX = "date";
scrollbarSeries.dataFields.valueY = "close";
// need to set on default state, as initially series is "show"
scrollbarSeries.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
scrollbarSeries.hiddenInLegend = true;
scrollbarSeries.fillOpacity = 0.5;
scrollbarSeries.strokeOpacity = 0.5;
var scrollbarX = new am4charts.XYChartScrollbar();
scrollbarX.series.push(scrollbarSeries);
chart.scrollbarX = scrollbarX;
/*
add ATR
-> I need to show it under the original chart
*/
var lineSeriesATR = chart.series.push(new am4charts.LineSeries());
lineSeriesATR.dataFields.dateX = "date";
lineSeriesATR.dataFields.valueY = "atr";
lineSeriesATR.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
lineSeriesATR.hiddenInLegend = true;
lineSeriesATR.fillOpacity = 0.5;
lineSeriesATR.strokeOpacity = 0.5;
chart.data = {!! json_encode($candles) !!};
javascript amcharts
add a comment |
please, I'm trying to create with AmCharts 4 chart with multiple data sets. In previous version it is done this way: https://www.amcharts.com/demos/multiple-data-sets/
but I can't find anything how to make it in 4th version.
I use the code from their website.
Everything is ok, next chart I want to add in section starting with comment add ATR -> I need to show it under the original chart.
Thank you very much for any help.
Have a nice day!
var chart = am4core.create("candlestick-chart", am4charts.XYChart);
chart.paddingRight = 20;
// chart.dateFormatter.inputDateFormat = "YYYY-MM-dd";
chart.dateFormatter.inputDateFormat = "x";
var dateAxis = chart.xAxes.push(new am4charts.DateAxis());
dateAxis.renderer.grid.template.location = 0;
var valueAxis = chart.yAxes.push(new am4charts.ValueAxis());
valueAxis.tooltip.disabled = true;
/*
add default series
*/
var series = chart.series.push(new am4charts.CandlestickSeries());
series.dataFields.dateX = "date";
series.dataFields.valueY = "close";
series.dataFields.openValueY = "open";
series.dataFields.lowValueY = "low";
series.dataFields.highValueY = "high";
series.dataFields.atr = "atr";
series.dataFields.average_atr = "average_atr";
series.simplifiedProcessing = true;
series.tooltipText = "Open:${openValueY.value}nLow:${lowValueY.value}nHigh:${highValueY.value}nClose:${valueY.value}nATR:{atr.formatNumber('#.000')}nAverage ATR:{average_atr.formatNumber('#.000')}";
series.riseFromPreviousState.properties.fillOpacity = 1;
series.dropFromPreviousState.properties.fillOpacity = 0;
chart.cursor = new am4charts.XYCursor();
/*
add scrollbar
*/
// a separate series for scrollbar
var scrollbarSeries = chart.series.push(new am4charts.LineSeries());
scrollbarSeries.dataFields.dateX = "date";
scrollbarSeries.dataFields.valueY = "close";
// need to set on default state, as initially series is "show"
scrollbarSeries.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
scrollbarSeries.hiddenInLegend = true;
scrollbarSeries.fillOpacity = 0.5;
scrollbarSeries.strokeOpacity = 0.5;
var scrollbarX = new am4charts.XYChartScrollbar();
scrollbarX.series.push(scrollbarSeries);
chart.scrollbarX = scrollbarX;
/*
add ATR
-> I need to show it under the original chart
*/
var lineSeriesATR = chart.series.push(new am4charts.LineSeries());
lineSeriesATR.dataFields.dateX = "date";
lineSeriesATR.dataFields.valueY = "atr";
lineSeriesATR.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
lineSeriesATR.hiddenInLegend = true;
lineSeriesATR.fillOpacity = 0.5;
lineSeriesATR.strokeOpacity = 0.5;
chart.data = {!! json_encode($candles) !!};
javascript amcharts
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31
add a comment |
please, I'm trying to create with AmCharts 4 chart with multiple data sets. In previous version it is done this way: https://www.amcharts.com/demos/multiple-data-sets/
but I can't find anything how to make it in 4th version.
I use the code from their website.
Everything is ok, next chart I want to add in section starting with comment add ATR -> I need to show it under the original chart.
Thank you very much for any help.
Have a nice day!
var chart = am4core.create("candlestick-chart", am4charts.XYChart);
chart.paddingRight = 20;
// chart.dateFormatter.inputDateFormat = "YYYY-MM-dd";
chart.dateFormatter.inputDateFormat = "x";
var dateAxis = chart.xAxes.push(new am4charts.DateAxis());
dateAxis.renderer.grid.template.location = 0;
var valueAxis = chart.yAxes.push(new am4charts.ValueAxis());
valueAxis.tooltip.disabled = true;
/*
add default series
*/
var series = chart.series.push(new am4charts.CandlestickSeries());
series.dataFields.dateX = "date";
series.dataFields.valueY = "close";
series.dataFields.openValueY = "open";
series.dataFields.lowValueY = "low";
series.dataFields.highValueY = "high";
series.dataFields.atr = "atr";
series.dataFields.average_atr = "average_atr";
series.simplifiedProcessing = true;
series.tooltipText = "Open:${openValueY.value}nLow:${lowValueY.value}nHigh:${highValueY.value}nClose:${valueY.value}nATR:{atr.formatNumber('#.000')}nAverage ATR:{average_atr.formatNumber('#.000')}";
series.riseFromPreviousState.properties.fillOpacity = 1;
series.dropFromPreviousState.properties.fillOpacity = 0;
chart.cursor = new am4charts.XYCursor();
/*
add scrollbar
*/
// a separate series for scrollbar
var scrollbarSeries = chart.series.push(new am4charts.LineSeries());
scrollbarSeries.dataFields.dateX = "date";
scrollbarSeries.dataFields.valueY = "close";
// need to set on default state, as initially series is "show"
scrollbarSeries.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
scrollbarSeries.hiddenInLegend = true;
scrollbarSeries.fillOpacity = 0.5;
scrollbarSeries.strokeOpacity = 0.5;
var scrollbarX = new am4charts.XYChartScrollbar();
scrollbarX.series.push(scrollbarSeries);
chart.scrollbarX = scrollbarX;
/*
add ATR
-> I need to show it under the original chart
*/
var lineSeriesATR = chart.series.push(new am4charts.LineSeries());
lineSeriesATR.dataFields.dateX = "date";
lineSeriesATR.dataFields.valueY = "atr";
lineSeriesATR.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
lineSeriesATR.hiddenInLegend = true;
lineSeriesATR.fillOpacity = 0.5;
lineSeriesATR.strokeOpacity = 0.5;
chart.data = {!! json_encode($candles) !!};
javascript amcharts
please, I'm trying to create with AmCharts 4 chart with multiple data sets. In previous version it is done this way: https://www.amcharts.com/demos/multiple-data-sets/
but I can't find anything how to make it in 4th version.
I use the code from their website.
Everything is ok, next chart I want to add in section starting with comment add ATR -> I need to show it under the original chart.
Thank you very much for any help.
Have a nice day!
var chart = am4core.create("candlestick-chart", am4charts.XYChart);
chart.paddingRight = 20;
// chart.dateFormatter.inputDateFormat = "YYYY-MM-dd";
chart.dateFormatter.inputDateFormat = "x";
var dateAxis = chart.xAxes.push(new am4charts.DateAxis());
dateAxis.renderer.grid.template.location = 0;
var valueAxis = chart.yAxes.push(new am4charts.ValueAxis());
valueAxis.tooltip.disabled = true;
/*
add default series
*/
var series = chart.series.push(new am4charts.CandlestickSeries());
series.dataFields.dateX = "date";
series.dataFields.valueY = "close";
series.dataFields.openValueY = "open";
series.dataFields.lowValueY = "low";
series.dataFields.highValueY = "high";
series.dataFields.atr = "atr";
series.dataFields.average_atr = "average_atr";
series.simplifiedProcessing = true;
series.tooltipText = "Open:${openValueY.value}nLow:${lowValueY.value}nHigh:${highValueY.value}nClose:${valueY.value}nATR:{atr.formatNumber('#.000')}nAverage ATR:{average_atr.formatNumber('#.000')}";
series.riseFromPreviousState.properties.fillOpacity = 1;
series.dropFromPreviousState.properties.fillOpacity = 0;
chart.cursor = new am4charts.XYCursor();
/*
add scrollbar
*/
// a separate series for scrollbar
var scrollbarSeries = chart.series.push(new am4charts.LineSeries());
scrollbarSeries.dataFields.dateX = "date";
scrollbarSeries.dataFields.valueY = "close";
// need to set on default state, as initially series is "show"
scrollbarSeries.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
scrollbarSeries.hiddenInLegend = true;
scrollbarSeries.fillOpacity = 0.5;
scrollbarSeries.strokeOpacity = 0.5;
var scrollbarX = new am4charts.XYChartScrollbar();
scrollbarX.series.push(scrollbarSeries);
chart.scrollbarX = scrollbarX;
/*
add ATR
-> I need to show it under the original chart
*/
var lineSeriesATR = chart.series.push(new am4charts.LineSeries());
lineSeriesATR.dataFields.dateX = "date";
lineSeriesATR.dataFields.valueY = "atr";
lineSeriesATR.defaultState.properties.visible = false;
// hide from legend too (in case there is one)
lineSeriesATR.hiddenInLegend = true;
lineSeriesATR.fillOpacity = 0.5;
lineSeriesATR.strokeOpacity = 0.5;
chart.data = {!! json_encode($candles) !!};
javascript amcharts
javascript amcharts
asked Nov 20 '18 at 9:21
Jan KožušníkJan Kožušník
183624
183624
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31
add a comment |
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31
add a comment |
2 Answers
2
active
oldest
votes
AmCharts 4 does not have the stock chart implemented yet. You can approximate panels and synced cursor and zoom by using the chart's containers to create additional charts and using the API to make the cursor and scrollbar affect all the charts.
You can create each chart and push them onto the chart container like so:
var container = am4core.create("chartdiv", am4core.Container); //create the container
container.width = am4core.percent(100); //set dimensions and layout
container.height = am4core.percent(100);
container.layout = "vertical";
// ... for each chart
var chart = container.createChild(am4charts.XYChart);
// ..set up as usual
While setting up each chart, you'll need to set up events to sync up zoom events:
// whenever any of the charts is zoomed, we should zoom all other charts
dateAxis.events.on("selectionextremeschanged", function (event) {
syncDateAxes(event.target);
})
// ...
function syncDateAxes(syncWithAxis) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var dateAxis = chart.xAxes.getIndex(0);
if (dateAxis != syncWithAxis) {
dateAxis.events.disableType("selectionextremeschanged");
dateAxis.start = syncWithAxis.start;
dateAxis.end = syncWithAxis.end;
dateAxis.events.enableType("selectionextremeschanged");
}
}
}
You'll also want to set up each chart's cursor and sync each of them up:
function initCursorListeners() {
cursorShowDisposers = ;
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.interactionsEnabled = true;
cursorShowDisposers.push(cursor.events.on("shown", function (event) {
handleShowCursor(event.target);
}));
}
}
var shownCursorChangeDisposer;
var shownCursorZoomStartedDisposer;
var shownCursorZoomEndedDisposer;
function handleShowCursor(shownCursor) {
// disable mouse for all other cursors
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != shownCursor) {
cursor.interactionsEnabled = false;
}
// remove show listener
cursorShowDisposers[i].dispose();
}
// add change disposer to the hovered chart cursor
shownCursorChangeDisposer = shownCursor.lineX.events.on("positionchanged", function (event) {
syncCursors(shownCursor);
});
shownCursorZoomStartedDisposer = shownCursor.events.on("zoomstarted", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerDown(point);
}
}
});
shownCursorZoomEndedDisposer = shownCursor.events.on("zoomended", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerUp(point);
}
}
});
shownCursor.events.once("hidden", function (event) {
shownCursorChangeDisposer.dispose();
shownCursorZoomStartedDisposer.dispose();
shownCursorZoomEndedDisposer.dispose();
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.hide(0);
cursorShowDisposers[i].dispose();
}
initCursorListeners();
});
}
function syncCursors(syncWithCursor) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
var point = { x: syncWithCursor.point.x, y: 0 };
if (cursor != syncWithCursor) {
cursor.triggerMove(point);
}
}
}
There are other UI tweaks you can make like disabling the zoom out button on other charts except the top-most one as well as showing the date axis labels on just the last chart.
Here's a full demo on how to do all of this. This is also included in the examples folder in the AmCharts zip file.
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
add a comment |
If you're using Stock Chart, you might want to hold off.
Stock chart is not yet available for V4. We're planning it for the
second part of 2018. No exact ETA, yet. Sorry.
https://www.amcharts.com/docs/v4/getting-started/migrating-from-v3/#No_Stock_chart_yet
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53389785%2famcharts-4-multiple-datasets%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
AmCharts 4 does not have the stock chart implemented yet. You can approximate panels and synced cursor and zoom by using the chart's containers to create additional charts and using the API to make the cursor and scrollbar affect all the charts.
You can create each chart and push them onto the chart container like so:
var container = am4core.create("chartdiv", am4core.Container); //create the container
container.width = am4core.percent(100); //set dimensions and layout
container.height = am4core.percent(100);
container.layout = "vertical";
// ... for each chart
var chart = container.createChild(am4charts.XYChart);
// ..set up as usual
While setting up each chart, you'll need to set up events to sync up zoom events:
// whenever any of the charts is zoomed, we should zoom all other charts
dateAxis.events.on("selectionextremeschanged", function (event) {
syncDateAxes(event.target);
})
// ...
function syncDateAxes(syncWithAxis) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var dateAxis = chart.xAxes.getIndex(0);
if (dateAxis != syncWithAxis) {
dateAxis.events.disableType("selectionextremeschanged");
dateAxis.start = syncWithAxis.start;
dateAxis.end = syncWithAxis.end;
dateAxis.events.enableType("selectionextremeschanged");
}
}
}
You'll also want to set up each chart's cursor and sync each of them up:
function initCursorListeners() {
cursorShowDisposers = ;
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.interactionsEnabled = true;
cursorShowDisposers.push(cursor.events.on("shown", function (event) {
handleShowCursor(event.target);
}));
}
}
var shownCursorChangeDisposer;
var shownCursorZoomStartedDisposer;
var shownCursorZoomEndedDisposer;
function handleShowCursor(shownCursor) {
// disable mouse for all other cursors
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != shownCursor) {
cursor.interactionsEnabled = false;
}
// remove show listener
cursorShowDisposers[i].dispose();
}
// add change disposer to the hovered chart cursor
shownCursorChangeDisposer = shownCursor.lineX.events.on("positionchanged", function (event) {
syncCursors(shownCursor);
});
shownCursorZoomStartedDisposer = shownCursor.events.on("zoomstarted", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerDown(point);
}
}
});
shownCursorZoomEndedDisposer = shownCursor.events.on("zoomended", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerUp(point);
}
}
});
shownCursor.events.once("hidden", function (event) {
shownCursorChangeDisposer.dispose();
shownCursorZoomStartedDisposer.dispose();
shownCursorZoomEndedDisposer.dispose();
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.hide(0);
cursorShowDisposers[i].dispose();
}
initCursorListeners();
});
}
function syncCursors(syncWithCursor) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
var point = { x: syncWithCursor.point.x, y: 0 };
if (cursor != syncWithCursor) {
cursor.triggerMove(point);
}
}
}
There are other UI tweaks you can make like disabling the zoom out button on other charts except the top-most one as well as showing the date axis labels on just the last chart.
Here's a full demo on how to do all of this. This is also included in the examples folder in the AmCharts zip file.
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
add a comment |
AmCharts 4 does not have the stock chart implemented yet. You can approximate panels and synced cursor and zoom by using the chart's containers to create additional charts and using the API to make the cursor and scrollbar affect all the charts.
You can create each chart and push them onto the chart container like so:
var container = am4core.create("chartdiv", am4core.Container); //create the container
container.width = am4core.percent(100); //set dimensions and layout
container.height = am4core.percent(100);
container.layout = "vertical";
// ... for each chart
var chart = container.createChild(am4charts.XYChart);
// ..set up as usual
While setting up each chart, you'll need to set up events to sync up zoom events:
// whenever any of the charts is zoomed, we should zoom all other charts
dateAxis.events.on("selectionextremeschanged", function (event) {
syncDateAxes(event.target);
})
// ...
function syncDateAxes(syncWithAxis) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var dateAxis = chart.xAxes.getIndex(0);
if (dateAxis != syncWithAxis) {
dateAxis.events.disableType("selectionextremeschanged");
dateAxis.start = syncWithAxis.start;
dateAxis.end = syncWithAxis.end;
dateAxis.events.enableType("selectionextremeschanged");
}
}
}
You'll also want to set up each chart's cursor and sync each of them up:
function initCursorListeners() {
cursorShowDisposers = ;
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.interactionsEnabled = true;
cursorShowDisposers.push(cursor.events.on("shown", function (event) {
handleShowCursor(event.target);
}));
}
}
var shownCursorChangeDisposer;
var shownCursorZoomStartedDisposer;
var shownCursorZoomEndedDisposer;
function handleShowCursor(shownCursor) {
// disable mouse for all other cursors
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != shownCursor) {
cursor.interactionsEnabled = false;
}
// remove show listener
cursorShowDisposers[i].dispose();
}
// add change disposer to the hovered chart cursor
shownCursorChangeDisposer = shownCursor.lineX.events.on("positionchanged", function (event) {
syncCursors(shownCursor);
});
shownCursorZoomStartedDisposer = shownCursor.events.on("zoomstarted", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerDown(point);
}
}
});
shownCursorZoomEndedDisposer = shownCursor.events.on("zoomended", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerUp(point);
}
}
});
shownCursor.events.once("hidden", function (event) {
shownCursorChangeDisposer.dispose();
shownCursorZoomStartedDisposer.dispose();
shownCursorZoomEndedDisposer.dispose();
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.hide(0);
cursorShowDisposers[i].dispose();
}
initCursorListeners();
});
}
function syncCursors(syncWithCursor) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
var point = { x: syncWithCursor.point.x, y: 0 };
if (cursor != syncWithCursor) {
cursor.triggerMove(point);
}
}
}
There are other UI tweaks you can make like disabling the zoom out button on other charts except the top-most one as well as showing the date axis labels on just the last chart.
Here's a full demo on how to do all of this. This is also included in the examples folder in the AmCharts zip file.
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
add a comment |
AmCharts 4 does not have the stock chart implemented yet. You can approximate panels and synced cursor and zoom by using the chart's containers to create additional charts and using the API to make the cursor and scrollbar affect all the charts.
You can create each chart and push them onto the chart container like so:
var container = am4core.create("chartdiv", am4core.Container); //create the container
container.width = am4core.percent(100); //set dimensions and layout
container.height = am4core.percent(100);
container.layout = "vertical";
// ... for each chart
var chart = container.createChild(am4charts.XYChart);
// ..set up as usual
While setting up each chart, you'll need to set up events to sync up zoom events:
// whenever any of the charts is zoomed, we should zoom all other charts
dateAxis.events.on("selectionextremeschanged", function (event) {
syncDateAxes(event.target);
})
// ...
function syncDateAxes(syncWithAxis) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var dateAxis = chart.xAxes.getIndex(0);
if (dateAxis != syncWithAxis) {
dateAxis.events.disableType("selectionextremeschanged");
dateAxis.start = syncWithAxis.start;
dateAxis.end = syncWithAxis.end;
dateAxis.events.enableType("selectionextremeschanged");
}
}
}
You'll also want to set up each chart's cursor and sync each of them up:
function initCursorListeners() {
cursorShowDisposers = ;
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.interactionsEnabled = true;
cursorShowDisposers.push(cursor.events.on("shown", function (event) {
handleShowCursor(event.target);
}));
}
}
var shownCursorChangeDisposer;
var shownCursorZoomStartedDisposer;
var shownCursorZoomEndedDisposer;
function handleShowCursor(shownCursor) {
// disable mouse for all other cursors
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != shownCursor) {
cursor.interactionsEnabled = false;
}
// remove show listener
cursorShowDisposers[i].dispose();
}
// add change disposer to the hovered chart cursor
shownCursorChangeDisposer = shownCursor.lineX.events.on("positionchanged", function (event) {
syncCursors(shownCursor);
});
shownCursorZoomStartedDisposer = shownCursor.events.on("zoomstarted", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerDown(point);
}
}
});
shownCursorZoomEndedDisposer = shownCursor.events.on("zoomended", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerUp(point);
}
}
});
shownCursor.events.once("hidden", function (event) {
shownCursorChangeDisposer.dispose();
shownCursorZoomStartedDisposer.dispose();
shownCursorZoomEndedDisposer.dispose();
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.hide(0);
cursorShowDisposers[i].dispose();
}
initCursorListeners();
});
}
function syncCursors(syncWithCursor) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
var point = { x: syncWithCursor.point.x, y: 0 };
if (cursor != syncWithCursor) {
cursor.triggerMove(point);
}
}
}
There are other UI tweaks you can make like disabling the zoom out button on other charts except the top-most one as well as showing the date axis labels on just the last chart.
Here's a full demo on how to do all of this. This is also included in the examples folder in the AmCharts zip file.
AmCharts 4 does not have the stock chart implemented yet. You can approximate panels and synced cursor and zoom by using the chart's containers to create additional charts and using the API to make the cursor and scrollbar affect all the charts.
You can create each chart and push them onto the chart container like so:
var container = am4core.create("chartdiv", am4core.Container); //create the container
container.width = am4core.percent(100); //set dimensions and layout
container.height = am4core.percent(100);
container.layout = "vertical";
// ... for each chart
var chart = container.createChild(am4charts.XYChart);
// ..set up as usual
While setting up each chart, you'll need to set up events to sync up zoom events:
// whenever any of the charts is zoomed, we should zoom all other charts
dateAxis.events.on("selectionextremeschanged", function (event) {
syncDateAxes(event.target);
})
// ...
function syncDateAxes(syncWithAxis) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var dateAxis = chart.xAxes.getIndex(0);
if (dateAxis != syncWithAxis) {
dateAxis.events.disableType("selectionextremeschanged");
dateAxis.start = syncWithAxis.start;
dateAxis.end = syncWithAxis.end;
dateAxis.events.enableType("selectionextremeschanged");
}
}
}
You'll also want to set up each chart's cursor and sync each of them up:
function initCursorListeners() {
cursorShowDisposers = ;
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.interactionsEnabled = true;
cursorShowDisposers.push(cursor.events.on("shown", function (event) {
handleShowCursor(event.target);
}));
}
}
var shownCursorChangeDisposer;
var shownCursorZoomStartedDisposer;
var shownCursorZoomEndedDisposer;
function handleShowCursor(shownCursor) {
// disable mouse for all other cursors
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != shownCursor) {
cursor.interactionsEnabled = false;
}
// remove show listener
cursorShowDisposers[i].dispose();
}
// add change disposer to the hovered chart cursor
shownCursorChangeDisposer = shownCursor.lineX.events.on("positionchanged", function (event) {
syncCursors(shownCursor);
});
shownCursorZoomStartedDisposer = shownCursor.events.on("zoomstarted", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerDown(point);
}
}
});
shownCursorZoomEndedDisposer = shownCursor.events.on("zoomended", function (event) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
if (cursor != event.target) {
var point = { x: event.target.point.x, y: 0 };
cursor.triggerUp(point);
}
}
});
shownCursor.events.once("hidden", function (event) {
shownCursorChangeDisposer.dispose();
shownCursorZoomStartedDisposer.dispose();
shownCursorZoomEndedDisposer.dispose();
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
cursor.hide(0);
cursorShowDisposers[i].dispose();
}
initCursorListeners();
});
}
function syncCursors(syncWithCursor) {
for (var i = 0; i < charts.length; i++) {
var chart = charts[i];
var cursor = chart.cursor;
var point = { x: syncWithCursor.point.x, y: 0 };
if (cursor != syncWithCursor) {
cursor.triggerMove(point);
}
}
}
There are other UI tweaks you can make like disabling the zoom out button on other charts except the top-most one as well as showing the date axis labels on just the last chart.
Here's a full demo on how to do all of this. This is also included in the examples folder in the AmCharts zip file.
answered Nov 21 '18 at 1:16
xorsparkxorspark
10k21127
10k21127
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
add a comment |
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
1
1
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
Thank you very much for your help! Have a nice day
– Jan Kožušník
Nov 21 '18 at 19:19
add a comment |
If you're using Stock Chart, you might want to hold off.
Stock chart is not yet available for V4. We're planning it for the
second part of 2018. No exact ETA, yet. Sorry.
https://www.amcharts.com/docs/v4/getting-started/migrating-from-v3/#No_Stock_chart_yet
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
add a comment |
If you're using Stock Chart, you might want to hold off.
Stock chart is not yet available for V4. We're planning it for the
second part of 2018. No exact ETA, yet. Sorry.
https://www.amcharts.com/docs/v4/getting-started/migrating-from-v3/#No_Stock_chart_yet
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
add a comment |
If you're using Stock Chart, you might want to hold off.
Stock chart is not yet available for V4. We're planning it for the
second part of 2018. No exact ETA, yet. Sorry.
https://www.amcharts.com/docs/v4/getting-started/migrating-from-v3/#No_Stock_chart_yet
If you're using Stock Chart, you might want to hold off.
Stock chart is not yet available for V4. We're planning it for the
second part of 2018. No exact ETA, yet. Sorry.
https://www.amcharts.com/docs/v4/getting-started/migrating-from-v3/#No_Stock_chart_yet
answered Nov 21 '18 at 0:48
David LiangDavid Liang
5,33811729
5,33811729
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
add a comment |
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
No problem, thank you for your answer :)
– Jan Kožušník
Nov 21 '18 at 19:21
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53389785%2famcharts-4-multiple-datasets%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I would recommend going for chart.js. It will solve your problem
– SUNIL JADHAV
Nov 27 '18 at 7:31