Bitbucket newly created remote branch is not listed
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ height:90px;width:728px;box-sizing:border-box;
}
Just created a new branch in Bitbucket but I can see it neither in sourcetree nor using the git branch -r command. Why do you think that is? Why I can't see that branch?
Do I need at least 1 commit on this fresh branch to see it in the remote list?
After creating the remote branch (from branch X) I did:
git pull origin X
git fetch --all
git remote update
I also did git config -e fetch is defined as below for remote X:
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
None of them worked. That fresh branch is still invisible.
git bitbucket
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
|
show 1 more comment
Just created a new branch in Bitbucket but I can see it neither in sourcetree nor using the git branch -r command. Why do you think that is? Why I can't see that branch?
Do I need at least 1 commit on this fresh branch to see it in the remote list?
After creating the remote branch (from branch X) I did:
git pull origin X
git fetch --all
git remote update
I also did git config -e fetch is defined as below for remote X:
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
None of them worked. That fresh branch is still invisible.
git bitbucket
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
Andgit branch -adoes not list it?
– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21
|
show 1 more comment
Just created a new branch in Bitbucket but I can see it neither in sourcetree nor using the git branch -r command. Why do you think that is? Why I can't see that branch?
Do I need at least 1 commit on this fresh branch to see it in the remote list?
After creating the remote branch (from branch X) I did:
git pull origin X
git fetch --all
git remote update
I also did git config -e fetch is defined as below for remote X:
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
None of them worked. That fresh branch is still invisible.
git bitbucket
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
Just created a new branch in Bitbucket but I can see it neither in sourcetree nor using the git branch -r command. Why do you think that is? Why I can't see that branch?
Do I need at least 1 commit on this fresh branch to see it in the remote list?
After creating the remote branch (from branch X) I did:
git pull origin X
git fetch --all
git remote update
I also did git config -e fetch is defined as below for remote X:
[remote "origin"]
fetch = +refs/heads/*:refs/remotes/origin/*
None of them worked. That fresh branch is still invisible.
git bitbucket
git bitbucket
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
edited Nov 22 '18 at 23:45
SoftwareTheory
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
asked Nov 22 '18 at 5:47
SoftwareTheorySoftwareTheory
6212825
6212825
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
Andgit branch -adoes not list it?
– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21
|
show 1 more comment
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
Andgit branch -adoes not list it?
– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
And
git branch -a does not list it?– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21
And
git branch -a does not list it?– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21
|
show 1 more comment
4 Answers
4
active
oldest
votes
Ok, I found the problem. The problem was actually about my being careless. The branch is created in the remote branch but I was not paying attention to the "Branch type" parameter while creating the branch in Bitbucket. git branch -r was listing all the branches on the remote alphabetically and I was trying to see my branch among the "feature/..." branch list but I had not created the brach as a "feature" branch type, I had created is as a "custom" branch type and it was being listed towards the top of a huge branch list without feature/ prefix. Thanks, @VonC for all the help.
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
add a comment |
[remote "X"]
If your remote is named X (like your branch), no amount of fetch or pull origin will fetch or pull anything from remote "X".
Even git fetch X might not fetch anything if you have no remote "origin" (and the refspec associate with remote X is refs/remotes/origin/*: if you don't have an origin...)
Type git remote -v and check if origin is actually referencing the right repo.
If you do, git config --local --edit will allow you to go and change your config, fixing the discrepancy between the name of the remote and the refspec.
A git ls-remote | grep X can help detect if the branch actually does exist.
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Doesgit ls-remote originlist your remote branchX?
– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
add a comment |
Try
git fetch origin
This will bring all branches created in remote to your local.
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
add a comment |
You may please try to push your branch to upstream using :
git push -u origin X
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
StackExchange.using("externalEditor", function () {
StackExchange.using("snippets", function () {
StackExchange.snippets.init();
});
});
}, "code-snippets");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "1"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53424592%2fbitbucket-newly-created-remote-branch-is-not-listed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
Ok, I found the problem. The problem was actually about my being careless. The branch is created in the remote branch but I was not paying attention to the "Branch type" parameter while creating the branch in Bitbucket. git branch -r was listing all the branches on the remote alphabetically and I was trying to see my branch among the "feature/..." branch list but I had not created the brach as a "feature" branch type, I had created is as a "custom" branch type and it was being listed towards the top of a huge branch list without feature/ prefix. Thanks, @VonC for all the help.
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
add a comment |
Ok, I found the problem. The problem was actually about my being careless. The branch is created in the remote branch but I was not paying attention to the "Branch type" parameter while creating the branch in Bitbucket. git branch -r was listing all the branches on the remote alphabetically and I was trying to see my branch among the "feature/..." branch list but I had not created the brach as a "feature" branch type, I had created is as a "custom" branch type and it was being listed towards the top of a huge branch list without feature/ prefix. Thanks, @VonC for all the help.
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
add a comment |
Ok, I found the problem. The problem was actually about my being careless. The branch is created in the remote branch but I was not paying attention to the "Branch type" parameter while creating the branch in Bitbucket. git branch -r was listing all the branches on the remote alphabetically and I was trying to see my branch among the "feature/..." branch list but I had not created the brach as a "feature" branch type, I had created is as a "custom" branch type and it was being listed towards the top of a huge branch list without feature/ prefix. Thanks, @VonC for all the help.
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
Ok, I found the problem. The problem was actually about my being careless. The branch is created in the remote branch but I was not paying attention to the "Branch type" parameter while creating the branch in Bitbucket. git branch -r was listing all the branches on the remote alphabetically and I was trying to see my branch among the "feature/..." branch list but I had not created the brach as a "feature" branch type, I had created is as a "custom" branch type and it was being listed towards the top of a huge branch list without feature/ prefix. Thanks, @VonC for all the help.
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
answered Nov 23 '18 at 14:11
SoftwareTheorySoftwareTheory
6212825
6212825
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
add a comment |
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
1
1
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
Well spotted. +1. I have added in my answer the command which helps finding your branch in that huge list of remote branches.
– VonC
Nov 23 '18 at 14:32
add a comment |
[remote "X"]
If your remote is named X (like your branch), no amount of fetch or pull origin will fetch or pull anything from remote "X".
Even git fetch X might not fetch anything if you have no remote "origin" (and the refspec associate with remote X is refs/remotes/origin/*: if you don't have an origin...)
Type git remote -v and check if origin is actually referencing the right repo.
If you do, git config --local --edit will allow you to go and change your config, fixing the discrepancy between the name of the remote and the refspec.
A git ls-remote | grep X can help detect if the branch actually does exist.
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Doesgit ls-remote originlist your remote branchX?
– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
add a comment |
[remote "X"]
If your remote is named X (like your branch), no amount of fetch or pull origin will fetch or pull anything from remote "X".
Even git fetch X might not fetch anything if you have no remote "origin" (and the refspec associate with remote X is refs/remotes/origin/*: if you don't have an origin...)
Type git remote -v and check if origin is actually referencing the right repo.
If you do, git config --local --edit will allow you to go and change your config, fixing the discrepancy between the name of the remote and the refspec.
A git ls-remote | grep X can help detect if the branch actually does exist.
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Doesgit ls-remote originlist your remote branchX?
– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
add a comment |
[remote "X"]
If your remote is named X (like your branch), no amount of fetch or pull origin will fetch or pull anything from remote "X".
Even git fetch X might not fetch anything if you have no remote "origin" (and the refspec associate with remote X is refs/remotes/origin/*: if you don't have an origin...)
Type git remote -v and check if origin is actually referencing the right repo.
If you do, git config --local --edit will allow you to go and change your config, fixing the discrepancy between the name of the remote and the refspec.
A git ls-remote | grep X can help detect if the branch actually does exist.
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
[remote "X"]
If your remote is named X (like your branch), no amount of fetch or pull origin will fetch or pull anything from remote "X".
Even git fetch X might not fetch anything if you have no remote "origin" (and the refspec associate with remote X is refs/remotes/origin/*: if you don't have an origin...)
Type git remote -v and check if origin is actually referencing the right repo.
If you do, git config --local --edit will allow you to go and change your config, fixing the discrepancy between the name of the remote and the refspec.
A git ls-remote | grep X can help detect if the branch actually does exist.
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
edited Nov 23 '18 at 14:31
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
answered Nov 22 '18 at 21:47
VonCVonC
854k30227223289
854k30227223289
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Doesgit ls-remote originlist your remote branchX?
– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
add a comment |
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Doesgit ls-remote originlist your remote branchX?
– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
Very Sorry. Remote is named origin. Fixed that. An upvote for catching that error in the question though.
– SoftwareTheory
Nov 22 '18 at 23:48
@SoftwareTheory Does
git ls-remote origin list your remote branch X?– VonC
Nov 23 '18 at 8:37
@SoftwareTheory Does
git ls-remote origin list your remote branch X?– VonC
Nov 23 '18 at 8:37
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
unfortunately that won't list it either @VonC
– SoftwareTheory
Nov 23 '18 at 11:35
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
Then the branch is not created on the remote side. Maybe try, for testing, to create a commit on that branch through the web UI. And see if a fetch does fetch it.
– VonC
Nov 23 '18 at 12:27
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
I found the problem. The problem was actually me not paying attention to the branch type and seeing the branch in a huge alphabetical list of branches.
– SoftwareTheory
Nov 23 '18 at 14:12
add a comment |
Try
git fetch origin
This will bring all branches created in remote to your local.
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
add a comment |
Try
git fetch origin
This will bring all branches created in remote to your local.
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
add a comment |
Try
git fetch origin
This will bring all branches created in remote to your local.
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
Try
git fetch origin
This will bring all branches created in remote to your local.
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
answered Nov 22 '18 at 7:13
JeevanJeevan
1326
1326
add a comment |
add a comment |
You may please try to push your branch to upstream using :
git push -u origin X
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
add a comment |
You may please try to push your branch to upstream using :
git push -u origin X
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
add a comment |
You may please try to push your branch to upstream using :
git push -u origin X
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
You may please try to push your branch to upstream using :
git push -u origin X
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
answered Nov 22 '18 at 7:32
Naveen MunjalNaveen Munjal
866
866
add a comment |
add a comment |
Thanks for contributing an answer to Stack Overflow!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fstackoverflow.com%2fquestions%2f53424592%2fbitbucket-newly-created-remote-branch-is-not-listed%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Has the newly created branch already been pushed to remote?
– Andreas
Nov 22 '18 at 5:54
I created the branch on the remote itself (on bitbucket using bitbucket gui)
– SoftwareTheory
Nov 22 '18 at 6:09
Is the branch visible on bitbucket itself?
– Andreas
Nov 22 '18 at 6:20
Yes it is visible on the bitbucket gui
– SoftwareTheory
Nov 22 '18 at 6:27
And
git branch -adoes not list it?– Lasse Vågsæther Karlsen
Nov 22 '18 at 7:21