Borane dimethylsulfide
 | |
| Names | |
|---|---|
| Other names BMS, Borane-dimethyl sulfide | |
| Identifiers | |
CAS Number |
|
3D model (JSmol) |
|
ECHA InfoCard | 100.032.998 |
PubChem CID |
|
InChI
| |
SMILES
| |
| Properties | |
Chemical formula | (CH3)2S•BH3 |
Molar mass | 75.96 g/mol |
| Appearance | colorless liquid |
Density | 0.801 g/mL |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). | |
Infobox references | |
Borane dimethylsulfide (BMS) is a complexed borane reagent that is used for hydroborations and reductions. The advantages of BMS over other borane reagents, such as borane-tetrahydrofuran, are its increased stability and higher solubility.[1] BMS is commercially available at much higher concentrations than its tetrahydrofuran counterpart (10 M neat) and does not require sodium borohydride as a stabilizer, which could result in undesired side reactions.[2] In contrast, borane.THF requires sodium borohydride to inhibit reduction of THF to tributyl borate.[2] BMS is soluble in most aprotic solvents.
Contents
1 Preparation and structure
2 Reactions
2.1 Hydroborations
2.2 Reductions
3 Safety
4 References
Preparation and structure
Although usually purchased, BMS can be prepared by absorbing diborane into dimethyl sulfide:[3]
- B2H6 + 2 SMe2 → 2 Me2SBH3
It can be purified by bulb to bulb vacuum transfer. Although a structure of BMS has not been determined crystallographically, (pentafluorophenyl)-borane dimethylsulfide (C6F5BH2SMe2), has been examined by X-ray crystallography.[4] The boron center adopts a tetrahedral geometry.
Reactions
Hydroborations
Due to the experimental ease of its use, BMS has become common in hydroboration reactions.[5] In hydroborations with BMS, the dimethylsulfide dissociates in situ, liberating diborane, which rapidly adds to the unsaturated bonds. The resulting organoborane compounds are useful intermediates in organic synthesis. Boranes add to alkenes in an anti-Markovnikov fashion and allow conversion of alkynes to the corresponding cis-alkenes.
Reductions
BMS has been employed for the reduction of many functional groups. Reductions of aldehydes, ketones, epoxides, esters, and carboxylic acids give the corresponding alcohols. Lactones are reduced to diols, and nitriles are reduced to amines. Acid chlorides and nitro groups are not reduced by BMS.
Borane dimethylsulfide is one of the most common bulk reducing agents used in the Corey–Itsuno reduction. The dimethylsulfide ligand attenuates the reactivity of the borane. Activation by the nitrogen of the chiral oxazoborolidine catalyst of the stoichiometric reducing agent allows for asymmetric control of the reagent. In general BMS does not lead to significantly greater enantiomeric selectivites than borane-THF, however its increased stability in the presence of moisture and oxygen makes it the reagent of choice for the reduction.[6]
Safety
Borane dimethylsulfide is flammable and reacts readily with water to produce a flammable gas.[7]
References
^ Hutchins, Robert O.; Cistone, Frank (1981). "Utility and Applications of Borane Dimethylsulfide in Organic Synthesis. A Review". Organic Preparations and Procedures International. 13 (3–4): 225. doi:10.1080/00304948109356130..mw-parser-output cite.citation{font-style:inherit}.mw-parser-output q{quotes:"""""""'""'"}.mw-parser-output code.cs1-code{color:inherit;background:inherit;border:inherit;padding:inherit}.mw-parser-output .cs1-lock-free a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/6/65/Lock-green.svg/9px-Lock-green.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-lock-limited a,.mw-parser-output .cs1-lock-registration a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/d/d6/Lock-gray-alt-2.svg/9px-Lock-gray-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-lock-subscription a{background:url("//upload.wikimedia.org/wikipedia/commons/thumb/a/aa/Lock-red-alt-2.svg/9px-Lock-red-alt-2.svg.png")no-repeat;background-position:right .1em center}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration{color:#555}.mw-parser-output .cs1-subscription span,.mw-parser-output .cs1-registration span{border-bottom:1px dotted;cursor:help}.mw-parser-output .cs1-hidden-error{display:none;font-size:100%}.mw-parser-output .cs1-visible-error{font-size:100%}.mw-parser-output .cs1-subscription,.mw-parser-output .cs1-registration,.mw-parser-output .cs1-format{font-size:95%}.mw-parser-output .cs1-kern-left,.mw-parser-output .cs1-kern-wl-left{padding-left:0.2em}.mw-parser-output .cs1-kern-right,.mw-parser-output .cs1-kern-wl-right{padding-right:0.2em}
^ ab Kollonitisch, J. (1961). "Reductive Ring Cleavage of Tetrahydrofurans by Diborane". J. Am. Chem. Soc. 83 (6): 1515. doi:10.1021/ja01467a056.
^ Braun, L. M.; Braun, R. A.; Crissman, R.; Opperman, M.; Adams, R. M. (1971). "Dimethyl Sulfide-Borane. A Convenient Hydroborating Reagent". J. Org. Chem. 36 (16): 2388–2389. doi:10.1021/jo00815a047.
^ Fuller, Anna-Marie; Hughes, David L.; Lancaster, Simon J.; White, Callum M. (2010). "Synthesis and Structure of the Dimethyl Sulfide Adducts of Mono- and Bis(pentafluorophenyl)borane". Organometallics. 29 (9): 2194. doi:10.1021/om100152v.
^ Atsushi Abiko (1925). "Dicyclohexylboron Trifluoromethylsulfonate". Organic Syntheses. 79: 103.; Collective Volume, 10, p. 273
^ Corey, E.J.; Helal, C. J. (1998). "Reduction of Carbonyl Compounds with Chiral Oxazoborolidine Catalysts: A New Paradigm for Enantioselective Catalysis and a Powerful New Synthetic Method". Angew. Chem. Int. Ed. 37 (15): 1986–2012. doi:10.1002/(SICI)1521-3773(19980817)37:15<1986::AID-ANIE1986>3.0.CO;2-Z.
^ "Sigma-Aldrich Material Safety Data Sheet". www.sigmaaldrich.com/. Retrieved 29 November 2014.
